再生稻割穗机的设计与性能试验
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

“863”计划子项目(2014AA10A605-8); 中央高校基本科研业务费专项(2014PY043,2013PY123)


Designing and performance testing a novel head spike harvester of ratoon rice
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以拆除插植装置后的高地隙乘坐式插秧机底盘为动力底盘,在其上增设割台、输送槽、集穗箱以及第二动力等装置,设计一种专用于再生稻穗头收获的高地隙割穗机。对该高地隙割穗机的割幅、生产率、行走功率等主要工作参数进行理论计算,对其螺旋推运器、割台、输送装置等主要工作部件的结构及运动参数进行分析,并试制割幅为1.6 m、理论喂入量为1.8 kg/s的样机。以“两优28”、“黄华占”水稻品种为试验对象,在试验田对该割穗机进行收获及稻茬碾压性能田间试验。结果表明:该机田间碾压率≤25.15%,割茬高度在250~650 mm间无级调节,纯工作效率约为0.24 hm2/h,满足再生稻穗头收获作业要求。

    Abstract:

    A prototype of head spike harvester was designed based on a transplanter with high ground clearance and without transplanting device.The harvester was used to harvest ratoon rice in field.The harvester contained helix transport,cutting platform,conveyor trough,grain tank and the second power.The parameters of structure and motion were calculated based on the agronomic requirements of ratoon rice in China.Its cutting width is 1.6 m and feeding amount is 1.8 kg/s.The three dimensional model of the harvester was designed by Pro/E.The performance test of the prototype harvester was conducted in the experiment farm on Huazhong Agricultural University campus.Rice varieties were “Liangyou28” and “Huanghuazhan”.The soil firmness was 1 081.21 kPa and 1 898.55 kPa,respectively.The soil moisture content was 25.56% and 19.71%,respectively.The results showed that the mass distribution and equilibrium ability of prototype harvester was well.The rate of stubble pushing was less than 25.15%.The stubble height can be adjusted from 250 mm to 650 mm.The pure field work efficiency was more than 0.24 hm2/h meeting the practicial requirements.

    参考文献
    相似文献
    引证文献
引用本文

张国忠,张翼翔,黄见良,翟康毅,周勇,黄海东,樊啟洲.再生稻割穗机的设计与性能试验[J].华中农业大学学报,2016,35(1):131-136

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2015-04-16
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-12-23
  • 出版日期: